Hello all,

We have a problem with one of our hosts in our enviroment.

De host is disconnected, the vm's are still running on it, but we cant reconnect the host to vcenter.

We can't connect to the host anymore with ssh and if we use the ALT + F1 function then no prompt appears.

So if we have read all the articles correctly the only thing left for us to do is disconnect the host from vcenter (if this is still even possible) en then re-register the vms on a different host.

Our concern with this step is what will happen with the vm's that are running on the host when we say: remove in vcenter.

Will the machines keep on running? and even though they are running on the removed host can we re-register them on a host that is still in the cluster ?.

Cause we thought this should be the procedure:

1. remove the host from vcenter

2. re-register the vm's on different host(s)

3. Turn of the machine that is running on the disconnected host

4. Turn on the machine re-regsitered on the cluster host(s)

Can anyone have a read through this and give us a little hope that this will have a good percentage of succeeding..?

Thanks in advance for any assistance.

修改vmx文件，添加如下字段

usb_xhci.autoConnect.device2

usb_xhci.autoConnect.device3

并设置虚拟机开机时自动连接usb设备，

此配置字段对U盘作用良好，好似对 无线键鼠不起作用?

每次虚拟机开机还得手动连接，而且下回再打开此虚拟机时，添加的配置字段会自动清除。

如有解决方案请联系我 e-mail:zulinfi@163.com

以下为vmx文件：

encoding = "GBK"
config.version = "8"
virtualHW.version = "12"
scsi0.present = "TRUE"
scsi0.virtualDev = "lsisas1068"
sata0.present = "TRUE"
memsize = "3072"
mem.hotadd = "TRUE"
scsi0:0.present = "TRUE"
scsi0:0.fileName = "Windows 10_32税务开票用-cl1-000005.vmdk"
sata0:1.present = "TRUE"
sata0:1.autodetect = "TRUE"
sata0:1.deviceType = "cdrom-raw"
ethernet0.present = "TRUE"
ethernet0.connectionType = "bridged"
ethernet0.virtualDev = "e1000e"
ethernet0.wakeOnPcktRcv = "FALSE"
ethernet0.addressType = "static"
usb.present = "TRUE"
ehci.present = "TRUE"
ehci.pciSlotNumber = "34"
sound.present = "TRUE"
sound.virtualDev = "hdaudio"
sound.fileName = "VX2363 Series-1 (NVIDIA High De"
sound.autodetect = "FALSE"
mks.enable3d = "TRUE"
svga.graphicsMemoryKB = "1048576"
serial0.present = "TRUE"
serial0.fileType = "thinprint"
pciBridge0.present = "TRUE"
pciBridge4.present = "TRUE"
pciBridge4.virtualDev = "pcieRootPort"
pciBridge4.functions = "8"
pciBridge5.present = "TRUE"
pciBridge5.virtualDev = "pcieRootPort"
pciBridge5.functions = "8"
pciBridge6.present = "TRUE"
pciBridge6.virtualDev = "pcieRootPort"
pciBridge6.functions = "8"
pciBridge7.present = "TRUE"
pciBridge7.virtualDev = "pcieRootPort"
pciBridge7.functions = "8"
vmci0.present = "TRUE"
hpet0.present = "TRUE"
usb.vbluetooth.startConnected = "FALSE"
sensor.accelerometer = "disabled"
sensor.ambientLight = "disabled"
sensor.compass = "disabled"
sensor.gyrometer = "disabled"
sensor.inclinometer = "disabled"
sensor.location = "pass-through"
sensor.orientation = "disabled"
displayName = "Win10_32位办公开票"
guestOS = "windows9"
nvram = "Win10_32位办公开票.nvram"
virtualHW.productCompatibility = "hosted"
powerType.powerOff = "soft"
powerType.powerOn = "soft"
powerType.suspend = "soft"
powerType.reset = "soft"
extendedConfigFile = "Win10_32位办公开票.vmxf"
numa.autosize.vcpu.maxPerVirtualNode = "1"
numa.autosize.cookie = "10001"
uuid.bios = "56 4d 44 36 ce c7 5e 66-a3 13 35 75 e9 de 77 7b"
uuid.location = "56 4d 44 36 ce c7 5e 66-a3 13 35 75 e9 de 77 7b"
migrate.hostlog = ".\Windows 10 32办公开票-b1e8212e.hlog"
scsi0:0.redo = ""
pciBridge0.pciSlotNumber = "17"
pciBridge4.pciSlotNumber = "21"
pciBridge5.pciSlotNumber = "22"
pciBridge6.pciSlotNumber = "23"
pciBridge7.pciSlotNumber = "24"
scsi0.pciSlotNumber = "160"
usb.pciSlotNumber = "32"
ethernet0.pciSlotNumber = "192"
sound.pciSlotNumber = "33"
vmci0.pciSlotNumber = "35"
sata0.pciSlotNumber = "36"
scsi0.sasWWID = "50 05 05 66 ce c7 5e 60"
ethernet0.generatedAddressOffset = "0"
vmci0.id = "-193236920"
monitor.phys_bits_used = "42"
vmotion.checkpointFBSize = "4194304"
vmotion.checkpointSVGAPrimarySize = "33554432"
cleanShutdown = "FALSE"
softPowerOff = "FALSE"
usb_xhci:6.speed = "2"
usb_xhci:6.present = "TRUE"
usb_xhci:6.deviceType = "hub"
usb_xhci:6.port = "6"
usb_xhci:6.parent = "-1"
usb_xhci:7.speed = "4"
usb_xhci:7.present = "TRUE"
usb_xhci:7.deviceType = "hub"
usb_xhci:7.port = "7"
usb_xhci:7.parent = "-1"
svga.guestBackedPrimaryAware = "TRUE"
tools.syncTime = "FALSE"
vc.uuid = ""
policy.vm.mvmtid = ""
vm.genid = "6572508173046865130"
vm.genidX = "8686589763381290563"
checkpoint.vmState = ""
checkpoint.vmState.readOnly = "FALSE"
RemoteDisplay.vnc.enabled = "FALSE"
gui.lastPoweredViewMode = "fullscreen"
MemTrimRate = "30"
applianceView.coverPage.author = "zulinfi"
applianceView.coverPage.version = "1.0"
tools.upgrade.policy = "useGlobal"
sata0:1.startConnected = "FALSE"
toolsInstallManager.lastInstallError = "0"
toolsInstallManager.updateCounter = "17"
isolation.tools.hgfs.disable = "FALSE"
priority.grabbed = "normal"
priority.ungrabbed = "normal"
sharedFolder0.present = "true"
sharedFolder0.enabled = "true"
sharedFolder0.readAccess = "true"
sharedFolder0.hostPath = "Z:\各类软件"
sharedFolder0.guestName = "各类软件"
sharedFolder0.expiration = "session"
sharedFolder1.present = "true"
sharedFolder1.enabled = "true"
sharedFolder1.readAccess = "true"
sharedFolder1.writeAccess = "true"
sharedFolder1.hostPath = "D:\Users\Zulinfi@163.com_dropbox\各类文档"
sharedFolder1.guestName = "各类文档"
sharedFolder1.expiration = "session"
sharedFolder.maxNum = "8"
hgfs.mapRootShare = "TRUE"
tools.remindInstall = "FALSE"
applianceView.showAtPowerOn = "FALSE"
sharedFolder2.present = "true"
sharedFolder2.enabled = "TRUE"
sharedFolder2.readAccess = "true"
sharedFolder2.writeAccess = "true"
sharedFolder2.hostPath = "T:\下载"
sharedFolder2.guestName = "下载"
sharedFolder2.expiration = "never"
sharedFolder3.present = "true"
sharedFolder3.enabled = "true"
sharedFolder3.readAccess = "true"
sharedFolder3.hostPath = "Z:\字体"
sharedFolder3.guestName = "字体"
sharedFolder3.expiration = "session"
sharedFolder4.present = "true"
sharedFolder4.enabled = "true"
sharedFolder4.readAccess = "true"
sharedFolder4.hostPath = "Z:\Program Files (x86)"
sharedFolder4.guestName = "Program Files (x86)"
sharedFolder4.expiration = "session"
sharedFolder4.writeAccess = "true"
sharedFolder5.present = "true"
sharedFolder5.enabled = "true"
sharedFolder5.readAccess = "true"
sharedFolder5.writeAccess = "true"
sharedFolder5.hostPath = "D:\Users\Zulinfi@163.com_dropbox\软件\电脑ERP"
sharedFolder5.guestName = "电脑ERP"
sharedFolder5.expiration = "session"
numvcpus = "1"
cpuid.coresPerSocket = "1"
vhv.enable = "FALSE"
RemoteDisplay.vnc.key = ""
sharedFolder6.present = "TRUE"
sharedFolder6.enabled = "TRUE"
sharedFolder6.readAccess = "TRUE"
sharedFolder6.writeAccess = "TRUE"
sharedFolder6.hostPath = "Z:\Program Files"
sharedFolder6.guestName = "Program Files"
sharedFolder6.expiration = "session"
templateVM = "FALSE"
gui.viewModeAtPowerOn = "windowed"
gui.applyHostDisplayScalingToGuest = "TRUE"
usb.generic.allowHID = "TRUE"
chipset.useAcpiBattery = "FALSE"
chipset.useApmBattery = "FALSE"
vmx.buildType = "release"
svga.autodetect = "TRUE"
svga.numDisplays = "1"
svga.maxWidth = "1920"
svga.maxHeight = "1080"
svga.vramSize = "134217728"
gui.exitAtPowerOff = "FALSE"
acpi.smbiosVersion2.7 = "FALSE"
acpi.mouseVMW0003 = "FALSE"
isolation.tools.copy.disable = "FALSE"
isolation.tools.dnd.disable = "FALSE"
isolation.tools.paste.disable = "FALSE"
usb:1.speed = "2"
usb:1.present = "TRUE"
usb:1.deviceType = "hub"
usb:1.port = "1"
usb:1.parent = "-1"
usb.autoConnect.device0 = ""
usb.autoConnect.device1 = ""
usb.autoConnect.device2 = ""
usb.autoConnect.device3 = ""
usb.autoConnect.device4 = ""
sound.enableAEC = "FALSE"
rollingTier0.uid = "1"
rollingTier0.interval = "86400"
rollingTier0.maximum = "1"
rollingTier0.clientFlags = "8"
rollingTier0.displayName = "自动保护快照"
rollingTier1.uid = "2"
rollingTier1.interval = "604800"
rollingTier1.baseTier = "1"
rollingTier1.baseTierInterval = "7"
rollingTier1.maximum = "1"
rollingTier1.clientFlags = "8"
rollingTier1.displayName = "自动保护快照"
rollingTier2.uid = "3"
rollingTier2.interval = "2419200"
rollingTier2.baseTier = "1"
rollingTier2.baseTierInterval = "28"
rollingTier2.maximum = "1"
rollingTier2.clientFlags = "8"
rollingTier2.displayName = "自动保护快照"
snapshot.numRollingTiers = "3"
workingDir = "."
rollingTier0.timeSincelast = "368729"
rollingTier1.timeSincelast = "368729"
rollingTier2.timeSincelast = "368729"
usb.autoConnect.device5 = ""
usb.autoConnect.device6 = ""
rollingTier1.baseTierSnapshotCount = "4"
rollingTier2.baseTierSnapshotCount = "4"
sharedFolder7.present = "true"
sharedFolder7.enabled = "true"
sharedFolder7.readAccess = "true"
sharedFolder7.writeAccess = "true"
sharedFolder7.hostPath = "D:\Users\QQData"
sharedFolder7.guestName = "QQData"
sharedFolder7.expiration = "session"
mks.keyboardFilter = "allow"
gui.exitOnCLIHLT = "TRUE"
ethernet0.address = "28:88:88:88:88:88"
serial0.startConnected = "FALSE"
usb_xhci.present = "TRUE"
usb_xhci.pciSlotNumber = "224"
usb_xhci.autoConnect.device0 = "path:1/2/2 autoclean:1"
usb_xhci:4.speed = "2"
usb_xhci:4.present = "TRUE"
usb_xhci:4.deviceType = "hub"
usb_xhci:4.port = "4"
usb_xhci:4.parent = "-1"
usb_xhci:5.speed = "4"
usb_xhci:5.present = "TRUE"
usb_xhci:5.deviceType = "hub"
usb_xhci:5.port = "5"
usb_xhci:5.parent = "-1"
usb_xhci.autoConnect.device1 = "path:1/2/3/1 autoclean:1"
usb_xhci.autoConnect.device2 = "vid:062a pid:4101 autoclean:1"
usb_xhci.autoConnect.device3 = "path:1/0/0/5 autoclean:1"
floppy0.present = "FALSE"
usb_xhci:8.present = "TRUE"
usb_xhci:8.deviceType = "hid"
usb_xhci:8.port = "0"
usb_xhci:8.parent = "4"

附上vmware.log文件

Hi All,

when I tried to stage patches on a ESX 5.5 server using update manager. In the esxupdate.log ,it says, "Error in copying from /altbootbank/vmware_f.v00 to /tmp/stagebootbank/vmware_f.v00: [Errno 2] No such file or directory: '/altbootbank/vmware_f.v00'") and i couldn't find vmware_f.v00 file on the altbootbank for some strange reason.

I tried to stage the patches on the same ESX server yesterday, it worked fine but it's not working today. I have checked the disk space and it's looks alright to me. Could you please help me to fix this issue.

/vmfs/volumes/c224d17b-5a25d564-71c0-2ae6513b2393 # pwd

/altbootbank

/vmfs/volumes/c224d17b-5a25d564-71c0-2ae6513b2393 # ls -l *vm

ls: *vm: No such file or directory

esxupdate.log :

2016-10-19T09:32:30Z esxupdate: BootBankInstaller.pyc: INFO: Copying /altbootbank/vmware_f.v00 to /tmp/stagebootbank/vmware_f.v00

2016-10-19T09:32:30Z esxupdate: HostImage: ERROR: Failed to send vob install.stage.error: [Errno 27] File too large

2016-10-19T09:32:30Z esxupdate: esxupdate: ERROR: An esxupdate error exception was caught:

2016-10-19T09:32:30Z esxupdate: esxupdate: ERROR: Traceback (most recent call last):

2016-10-19T09:32:30Z esxupdate: esxupdate: ERROR:  File "/usr/sbin/esxupdate", line 216, in main

2016-10-19T09:32:30Z esxupdate: esxupdate: ERROR:    cmd.Run()

2016-10-19T09:32:30Z esxupdate: esxupdate: ERROR:  File "/build/mts/release/bora-3247226/bora/build/esx/release/vmvisor/sys-boot/lib/python2.7/site-packages/vmware/esx5update/Cmdline.py", line 144, in Run

2016-10-19T09:32:30Z esxupdate: esxupdate: ERROR:  File "/build/mts/release/bora-3247226/bora/build/esx/release/vmvisor/sys-boot/lib/python2.7/site-packages/vmware/esximage/Transaction.py", line 245, in InstallVibsFromSources

2016-10-19T11:28:22Z esxupdate: esxupdate: ERROR: InstallationError: ("set(['VMware_bootbank_misc-cnic-register_1.72.1.v50.1i-1vmw.550.0.0.1331820',

2016-10-19T11:28:22Z esxupdate: ', 'VMware_bootbank_sata-sata-sil_2.3-4vmw.550.0.0.1331820', 'VMware_bootbank_esx-base_5.5.0-3.95.4345813', 'VMware_bootbank_ata-pata-atiixp_0.4.6-4vmw.550.0.0.1331820'])", "Error in copying from /altbootbank/vmware_f.v00 to /tmp/stagebootbank/vmware_f.v00: [Errno 2] No such file or directory: '/altbootbank/vmware_f.v00'")

Error from update manager:

Stage patches to entity

The host returns esxupdate error code:15. The

package manager transaction is not successful.

Check the Update Manager log files and esxupdate

df -h

Filesystem  Size  Used Available Use% Mounted on

VMFS-5    131.8G  35.2G    96.5G  27% /vmfs/volumes/vh1027-datastore

VMFS-5      3.2T  3.1T    51.0G  98% /vmfs/volumes/Exchange

VMFS-5      9.1T  3.4T      5.7T  38% /vmfs/volumes/LocalVMs-SANdatastore

VMFS-5      4.5T 995.0M      4.5T  0% /vmfs/volumes/SRMVMs

VMFS-5      5.6T  5.6T      2.0G 100% /vmfs/volumes/JARIC-Data

VMFS-5    953.5G  2.6G    950.9G  0% /vmfs/volumes/ISOs

vfat      285.8M 201.6M    84.2M  71% /vmfs/volumes/522ed803-9a2f06c1-4f0d-e4115b96a26a

vfat      249.7M 177.1M    72.6M  71% /vmfs/volumes/f6df1370-2b300aa7-22f1-0c9490b7ada8

vfat        4.0G  47.9M      4.0G  1% /vmfs/volumes/54ef6427-e60090b2-ffd5-e4115b96a26a

vfat      249.7M 161.6M    88.1M  65% /vmfs/volumes/c224d17b-5a25d564-71c0-2ae6513b2393

Regards

PD

Buongiorno,

qualcuno sa per caso se e quando verranno supportati i dischi 4kn su esxi 6 ?

I have a windows 10 golden image that I have converted to a template and am provisioning a desktop pool using this and a vCenter customisation specification.  It clones the machine ok, but then fails with the error 'Guest customization is already pending'.  It does not create any logs on the VM and the sysprep file is not copied into the panther folder.  I THINK that I have run sysprep on this machine once and am wondering if this is causing the issues. If i create a snapshot and use Quickprep it is fine.  Has anyone else had this issue and knwo how to fix it?  It is looking like I may need to recreate my Golden Image otherwise :-(

Have a View environment on 6.1.1 on ESXi 6.0 and am trying to build a Windows 10 pool to see if performance is decent.  It's not that great in a console.  I imagine there are no optimization scripts yet for Win 10, but eagerly awaiting such things. 

I have the base image built and all looks fine there.  When I go to build the pool (floating, linked clones), the machines get built and go through power on and then they hang at customizing.  It looks like the machines are blue screening for some reason and I can't figure out how to check that. 

Anyone else seen this kind of behavior?  Do I need my ESX guys to update the hosts beyond the 6.0 that was release in March? What about vCenter?  I don't see any newer View components beyond the 6/4/15 release and that is the release I am running on all View components. 

Hello everyone!

I'm having a Problem with the logout from windows 10 1607 vdi.

If the user take a logout from the windows 10 vdi, the status in view administrator stays to connected, after a few minutes it change to disconnected. The user can't logon again till I delete the desktop.

We're currently use Horizon View 6.2.2. The Windows 10 desktops with the anniversary update has got x64 with 4 GB RAM.

Someone got an idea why the users are not cleanly logout of the session?

Thanks to all for your help.

Greetings vrvm

Hi,

I am using powercli (vmware.vim) for .NET. Need to know how can and where i get TIMESTAMP if a disk is added to VM or RAM is reduced or increased.

Regards,

Salman

Hello:

I am currently trying to figure out a very strange issue with Windows 10 1607 (we did not have these issues with 1511).  We have a few applications installed on our golden master VM.  I am recomposing our pools and within the linked clones, some of the applications simply do not run at all.  These applications will run fine on the golden master VM, just not on any linked clones.  An example is Office 2016 click to run, it will crash.  Another is Symantec Endpoint Protection which opens but shows a blank screen and autoprotect is malfunctioning.  I am not sure why these applications would break simply from the cloning process.  I am using the standard guest customization, with only a couple of tweaks, mainly setting the local administrator password and mostly defaults. 

Any ideas on why this would happen, only with Windows 10 1607?  I have seen a lot of problems related to guest customization for Windows 10 but mostly that's where it stalls or freezes and does not work.  It's working and completing but somehow these applications are breaking.

Thanks in advance.

I hope someone can help me.

We are running ESXi6.0, Vcenter 6.0.

Most VMWare clients (Windows 7) are running Hardware version 7. Some of the newer machines are running hardware version 11.

I noticed that the Hardware version 11 clients have Event ID 41 errors in the System log. They reboot spontaneously. There is no logic in time / date / frequency. As a test I upgraded my own system to hardware version 11 yesterday and today it was rebooted twice

There is no memory dump or crash information in the logging.

Just the message in Dutch: "Het systeem is opnieuw opgestart zonder eerst correct te worden afgesloten. Deze fout is mogelijk veroorzaakt doordat het systeem niet meer reageert of is vastgelopen of doordat de stroom is uitgevallen."

Freely translated: The machine restarted without first being shutdown properly. This error might be caused because the system stopped responding or hang or the power dropped.

Can anyway please advise? All Hardware version 11 machines have this error in the logging. But the frequency and the day/time varies.

They all have Windows 7 guest OS.

VMware tools installed.

2 CPUs

4 Gb memory

HDD between 50 Gb - 100 Gb

Systems are on different ESX hosts and different datastores. Only thing in common is the hardware version.

Hi,

I was trying to setup a home ESX box and I'm having trouble getting the raid controller recognized..

HW Info:

-MB is  Gigabyte GA-H87-D3H ; the on board SATA controller has the raid function turned off and the SATA port mode set to 'IDE' as opposed to AHCI

   ->ESX is installed on a single SSD attached to the MB SATA controller; obviously it's seen fine.

-Raid controller is the LSI 9341-4i with 4 SATA SSDs hanging off of it.

The raid card itself seems to work as I can get into the raid BIOs and configure a new raid 5 volume.

Once ESX is booted 'lspci -v' does seem to show the raid card...

0000:01:00.0 RAID bus controller Mass storage controller: LSI MegaRAID SAS Fury Controller [vmhba1]
         Class 0104: 1000:005f

However in the Vsphere client I don't see the device or any volumes. I only see the OS disk and the CD-Rom which are both attached to the MB SATA controller.

Things I've tried:

-I installed the offline bundle from VMWare...

     megaraid_sas-6.600.60.00.1vmw-offline_bundle-1330596.zip

This installed without error, rebooted, but still can't see the raid controller.

-I also tried a slightly new driver from LSI with no change.

Q:

Anyone got any ideas about what I'm doing wrong here?

Hi

Would it somehow be possible to limit which security group that can be attached to a blueprint for a certain users?

Br

Johan

Is there any way how to automate vShpere replication? via powercli or any other way? (3rd party)

Or is it possible to have replication enabled for entire datastore, VMs group folder or any other subset contining VMs?

The intension here is to either deploy or move virtual machine into that subset that is already being replicated to have the replication enabled on that particular machine automaticaly without human interaction.

Hello all

There is a workaround to migrate from windows vcenter 6.x to vcsa version.

I need a clear answer if the opposite is true without installing a NEW windows vcenter and move everything to the new one

Your help will be valuable

Thanks in advance

Hi Everyone

I have been trying to add a vGPU using pyVmomi. I found a way of doing it in powershell from a blog which is as follows:

Param ($VM, $vGPUProfile)

    $VM = Get-VM $VM

    $spec = New-Object VMware.Vim.VirtualMachineConfigSpec

    $spec.deviceChange = New-Object VMware.Vim.VirtualDeviceConfigSpec[] (1)

    $spec.deviceChange[0] = New-Object VMware.Vim.VirtualDeviceConfigSpec

    $spec.deviceChange[0].operation = 'add'

    $spec.deviceChange[0].device = New-Object VMware.Vim.VirtualPCIPassthrough

    $spec.deviceChange[0].device.deviceInfo = New-Object VMware.Vim.Description

    $spec.deviceChange[0].device.deviceInfo.summary = ''

    $spec.deviceChange[0].device.deviceInfo.label = 'New PCI device'

    $spec.deviceChange[0].device.backing = New-Object VMware.Vim.VirtualPCIPassthroughVmiopBackingInfo

    $spec.deviceChange[0].device.backing.vgpu = "$vGPUProfile"

    $vmobj = $VM | Get-View

    $reconfig = $vmobj.ReconfigVM_Task($spec)

    if ($reconfig) {

        $ChangedVM = Get-VM $VM

        $vGPUDevice = $ChangedVM.ExtensionData.Config.hardware.Device | Where { $_.backing.vgpu}

        $vGPUDevice | Select Key, ControllerKey, Unitnumber, @{Name="Device";Expression={$_.DeviceInfo.Label}}, @{Name="Summary";Expression={$_.DeviceInfo.Summary}}

However, I need a pyVmomi equivalent. The problem I am facing it is pyVmomi is not recognizing VirtualPCIPassthroughVmiopBackingInfo class.

Any ideas?

Добрый день!

Развернут View Connection Server 7.

Ругается на Untrusted Certificate от vCenter. vCenter(5.5)

Сертификат на View Connection Server от доменного СА уже получен и установлен.

Планирую обновить сертификаты на компоненты vSphere 5.5 и есть вопросы.

Использовал Automation Tool для генерации запросов на сертификаты.

Так же нашел статью как обновить сертификаты на хостах.

пока непонятна последовательность в которой нуджно устанавливать полученные сертификаты.

В Automation Tool есть SSL Update Planner, который выводит по шагам что нужно обновить:

1. Go to the machine with Single Sign-On installed and - Update the Single Sign-

On SSL certificate.

2. Go to the machine with Inventory Service installed and - Update Inventory Ser

vice trust to Single Sign-On.

3. Go to the machine with Inventory Service installed and - Update the Inventory

Service SSL certificate.

и т.п

А когда обновлять сами хосты? В первую очередь, наверное?

Заранее спасибо за ответы.

Hi Best community,

I can see from workload container Memory  Demand, usage and Capacity. How can I see these metrics from All Metrics.

Is Demand means what the VM needs

Usage what the VMs get from vCenter

Usage the Active memory

Many thanks

vSohill

Hi,

Since OSX Sierra update, my Vmware Fusion (professionnel edition in 8.5.0) with Windows 10 BootCamp doesn't work. It's normally ?

I've this error message (in French, sorry):

" La configuration de votre disque virtuel Boot Camp est obsolète.

Pour créer une nouvelle machine virtuelle Boot Camp, choisissez Fichier > Nouveau et sélectionnez "Plus d'options" puis "Installer à partir de Boot Camp".

Échec de l'activation du module 'Disk'.

Échec du démarrage de la machine virtuelle."

"Your Boot Camp virtual disk configuration is outdated

To Create a new Boot Camp virtual machin, choose Folder > New and select "More Options" and "Boot Camp Install".

Failed to activate module 'disk'.

Failed to start virtual machine."

Have you an idée ?

Think You.

Aurann

Ce message a été modifié par : Aurann

in Vcenter A, I have a VM that has internet connectivity via ESG using NAT.

AfterI vmotion the vM to vcenter B,

the VM does not have internet connectivity anymore.

how do I fix this?

We are changing from RSA to DUO Security for our MFA using Horizon View 6.2.3. On first screen when using the Hoizon View Client it display's "username" and "passcode" when in fact you are entering your AD "username" and "password".

What I am looking for is a way to change the wording of "passcode" to "password" so that our users do not get confused and end up trying to enter a DUO passcode.

Has anyone experienced the same issue using DUO Security?